Celltec CSG
د.إ0
Stainless steel IP68 compression load cell
Hermetically sealed
Suitable for hopper scales and vehicle testing facilities
Built-in surge arrestors
Celltec CSG Introduction
The Celltec CSG compression load cell is a heavy‑duty industrial force sensor designed for accurate measurement of compressive loads in high‑capacity weighing systems. Manufactured from high‑strength alloy steel with protective surface treatment, the CSG load cell offers excellent mechanical stability, long‑term reliability, and resistance to harsh industrial environments. Its compact canister‑type design ensures uniform load distribution and consistent metrological performance in demanding applications.
Installation
Correct mechanical installation is critical for accurate compression measurement:
1- Install the load cell on a flat, rigid, and well‑aligned foundation.
2- Ensure that the applied load is transferred vertically and concentrically onto the loading surface.
3- Avoid eccentric loading, side forces, and bending moments.
4- Use appropriate mounting accessories and hardened load buttons if required.
5- Mechanical overload protection is strongly recommended for dynamic or shock‑load conditions.
Proper mounting maximizes accuracy and protects the compression load cell from structural damage.
Loading
The Celltec CSG compression load cell provides stable and repeatable performance for high‑capacity weighing systems:
1- Wide range of rated capacities for industrial applications
2- High output sensitivity for precise signal conversion
3- Low creep and minimal combined error
4- Good temperature stability within compensated operating range
5- High insulation resistance for reliable electrical performance
6- Designed to withstand high safe and ultimate overload limits
These characteristics make the CSG suitable for continuous operation in demanding industrial environments.
Applications
1- Truck scales and weighbridges
2- Silo, tank, and hopper weighing systems
3- Heavy industrial process weighing
4- High‑capacity platform scales
5- Multi‑compression‑load‑cell weighing systems
A robust compression load cell engineered for precise and reliable performance in high‑load industrial weighing applications.
Various of kinds of heavy scales such as trolley scales, truck scales and train scales
Celltec CSG Dimensions (mm)
Wiring
The Celltec CSG compression load cell is supplied with a shielded industrial cable and uses a 4‑wire strain gauge configuration for reliable signal transmission in industrial weighing systems.
4‑Wire Connection
Green — Input (+)
Black — Input (–)
White — Output (+)
Red — Output (–)
Shield — Ground (connected at indicator side only)
Proper grounding of the shield helps minimize electrical noise and ensures stable measurement performance.
| Brand | Celltec |
|---|---|
| Capacity | 10t, 20t, 30t, 40t, 50t |
| IP (Ingress Protection) | IP68 |
| Class | C3, C4 |
| Elemental Material | Stainless Steel |
| Maximum Intervals | 3000, 4000 |
| Minimum Verification Interval | 12000, 14000 |
| Output Sensitivity | 2.0 ± 0.002 |
| Zero Balance | 1.0 |
| Input Resistance | 700 ± 7 |
| Output Resistance | 703 ± 4 |
| Excitation Voltage | 5 ~ 12 |
| Compensated Temperature | -10 ~+ 40 |
| Safe Overload | 150 |
| Ultimate Overload | 300 |
Downloads
Related products
Celltec RNF
د.إ0
Celltec RSR
د.إ0
Flintec MHT2
د.إ0
HBM RTN
د.إ0
Tedea 220
د.إ0
Zemic BM24R
د.إ0
Zemic H2F
د.إ0
Reviews
There are no reviews yet.