Celltec CSA
د.إ0
10t, 25t, 40t, 60t, 100t, 225t, 450t
Weighbridge Road, Weighbridge Rail, Truck & Silo Scales, Hopper Weigher
Celltec CSA Introduction
The Celltec CSA compression load cell is a high‑capacity industrial weighing sensor designed for accurate measurement of compressive loads in heavy‑duty weighing applications. Featuring a robust four‑column construction and manufactured from stainless steel, the CSA load cell provides excellent mechanical stability, high accuracy, and long‑term reliability. With IP68 environmental protection, it is well suited for outdoor and harsh industrial environments where resistance to moisture, dust, and contamination is required.
Installation
Proper mechanical installation is critical to ensure correct compression load measurement:
1- Install the load cell on a flat, rigid, and well‑aligned foundation.
2- Ensure that the applied load is transferred vertically and concentrically onto the loading surface.
3- Avoid eccentric loading, side forces, and bending moments.
4- Use suitable mounting accessories and follow recommended installation practices.
5- For dynamic or shock‑load conditions, mechanical overload protection is strongly recommended.
Correct mounting ensures stable performance and protects the load cell from mechanical damage.
Loading
The Celltec CSA delivers reliable metrological performance in high‑capacity compression weighing systems:
1- Available capacities from 10 t to 450 t
2- Approved accuracy class C3
3- Maximum number of verification intervals: 3000
4- Output sensitivity: 2.0 ± 0.002 mV/V
5- Low combined error and excellent repeatability
6- High insulation resistance (≥ 5000 MΩ)
7- Safe overload up to 150 %FS and ultimate overload up to 300 %FS
8- Wide operating temperature range (–40 to +80 °C)
These characteristics make the CSA suitable for continuous operation in demanding industrial environments.
Applications
1- Road and rail weighbridges
2- Truck and vehicle weighing systems
3- Silo and tank weighing
4- Hopper weighers
5- High‑capacity industrial weighing installations using multiple loadcells
A robust compression load cell designed for accurate and reliable performance in heavy‑duty industrial weighing applications.
Various of kinds of heavy scales such as trolley scales, truck scales and train scales
Measurement of pressure or tension force such as force testing device
Various types of weighing silos and tanks
Celltec CSA Dimensions (mm)
Wiring
The Celltec CSA compression load cell is supplied with a shielded industrial cable and uses a 4‑wire strain gauge configuration, exactly as specified in the official datasheet.
4‑Wire Connection
- Green — Input (+)
- Black — Input (–)
- White — Output (+)
- Red — Output (–)
- Shield — Ground (connected at indicator side only)
Proper grounding of the shield helps reduce electrical noise and ensures stable signal transmission.
| Brand | Celltec |
|---|---|
| Capacity | 100t, 10t, 225t, 25t, 40t, 450t, 60t |
| IP (Ingress Protection) | IP68 |
| Class | C3 |
| Elemental Material | Stainless Steel |
| Maximum Intervals | 3000 |
| Minimum Verification Interval | 10000 |
| Output Sensitivity | 2.0 ± 0.002 |
| Zero Balance | 1.0 |
| Input Resistance | 450 ± 5 |
| Output Resistance | 480 ± 5 |
| Excitation Voltage | 5 ~ 15 |
| Compensated Temperature | -10 ~+ 40 |
| Safe Overload | 150 |
| Ultimate Overload | 300 |
Downloads
Related products
Flintec CN3
د.إ0
Flintec MHT1
د.إ0
Laumas CBL
د.إ0
Laumas CK
د.إ0
Revere RLC
د.إ0
Tedea 120
د.إ0
Zemic BM14A
د.إ0
Reviews
There are no reviews yet.