Celltec USC1
د.إ0
Stainless steel IP68 Compression/tension load cell
Hermetically sealed
Suitable for vehicle and hopper scales and vehicle testing facilities
Built-in surge arrestors
Celltec USC1 Introduction
The Celltec USC1 universal load cell is a high‑capacity industrial weighing sensor designed for precise force measurement in demanding static weighing applications. Engineered for tension and compression operation, the USC1 delivers reliable and repeatable performance in hopper scales, testing machines, and heavy‑duty industrial weighing systems. Its stainless‑steel construction and hermetically sealed design ensure long‑term stability and protection against harsh environmental conditions. Fully compatible with standard weighing instruments, this load cell provides dependable performance where accuracy, durability, and environmental resistance are critical.
Installation
Proper installation ensures accurate measurement and long service life of the load cell:
1- Install the load cell in a straight axial loading configuration to ensure correct force transfer.
2-Use appropriate threaded connections and mounting accessories designed for the USC1 structure.
3- Mounting surfaces must be flat, rigid, and well aligned to prevent side loading or torsional stress.
4- Provide sufficient mechanical clearance to allow free movement under load.
5- During installation, protect the load cell from welding currents, shock loads, and mechanical impacts.
Correct mounting is essential to maintain accuracy and ensure safe operation throughout the load range.
Loading
The Celltec USC1 load cell offers stable metrological performance for industrial weighing applications:
1- High output stability for consistent signal transmission
2- Low creep and minimal hysteresis for accurate long‑term measurements
3- Certified C3 accuracy class suitable for industrial and commercial systems
4- Wide operating and compensated temperature ranges
5- High overload protection for safe operation under demanding conditions
These characteristics make the USC1 suitable for heavy‑duty weighing systems requiring reliable load measurement over extended periods.
Applications
1- Hopper and silo weighing systems
2- Testing machines and force measurement equipment
3- Heavy‑duty industrial weighing installations
4- Process weighing and batching systems
5- Weighing systems using multiple loadcells and junction boxes
A robust and dependable universal load cell designed for accurate and continuous load measurement in industrial environments.
Various Types of hanging scales such as crane scales and hanging scales
Various Types of ceiling weighing, such as fixed and mobile ceiling crane weighing, elevator and hoist weighing, slaughterhouse and slaughterhouse ceiling weighing, and medical equipment ceiling weighing.
Measurement of compression or tension force such as force testing device
Celltec USC1 Dimensions (mm)
Wiring
The Celltec USC1 is supplied with a shielded industrial cable and uses a standard strain‑gauge wiring configuration compatible with most industrial indicators and junction boxes.
4‑Wire Connection
Red — Excitation (+)
Black — Excitation (–)
Green — Signal (+)
White — Signal (–)
The cable jacket provides reliable resistance to industrial interference and environmental exposure. For best performance, the shield should be grounded at the indicator or junction box side only.
| Brand | Celltec |
|---|---|
| Capacity | 100t, 10t, 20t, 25t, 30t, 40t, 50t |
| IP (Ingress Protection) | IP68 |
| Class | C3 |
| Elemental Material | Stainless Steel |
| Maximum Intervals | 3000 |
| Minimum Verification Interval | 10000 |
| Output Sensitivity | 1.5 ± 0.002 |
| Zero Balance | 1.0 |
| Input Resistance | 700 ± 7 |
| Output Resistance | 703 ± 4 |
| Excitation Voltage | 8 ~ 12 |
| Compensated Temperature | -10 ~ +50 |
| Safe Overload | 150 |
| Ultimate Overload | 300 |
Downloads
Related products
Celltec PA3
د.إ0
Celltec PA6
د.إ0
Celltec PAL1B
د.إ0
Celltec PSGM
د.إ0
Celltec RSS
د.إ0
Celltec US5
د.إ0
Tedea 615
د.إ0
Reviews
There are no reviews yet.